中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

200G QSFP56 SR4 100m 850nm PM4 Transceiver

Features

QSFP56 Serial Optical Interface

4x50G PAM4 retimed 200GAUI-4 C2M electrical interface

MPO-12 connector
4 channel VCSEL array and 4 channels PIN photodetector array >Maximum link length of 70m on OM3 or 100m on OM4

QSFP MSA Compliant

Hot Pluggable QSFP56 form factor
Compliant with SFF8636 Rev 2.10a

Support Protocol

Compliant with IEEE 802.3cd

Low Power Consumption

Less than 5W in temperature range of 0 to 70℃

Applications

200GBASE-SR4200G Ethernet
Data center

现在查询下载

类别

热门产品

产品详细信息

200G QSFP56 SR4 100m 850nm MPO PM4 Optical Transceiver

Functional Block Diagram

200G QSFP56 SR4

General Description

200G QSFP56 SR4 Optical Transceiver modules are designed for use in 200Gigabit Ethernet links over OM3/OM4 multimode fiber. They are compliant with the QSFP MSA and with IEEE 802.3cd 200GBASE-SR4 specification. Digital diagnostics functions are available via the I2C interface as specified by SFF-8636.The transceiver is RoHS 2.0 compliant and lead-free per Directive 2011/65/EU.

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Storage Temperature	Ts	-40	85	℃
Relative Humidity (non-condensation)	RH		85	%
Supply Voltage	Vcc	-0.5	3.6	V
Receiver Damage Threshold, per Lane	PR dmg	5		dBm

Recommended Operating Conditions

Parameter	Symbol	Min	Max	Unit
Operating Case Temperature	Top	0	70	℃
Power Supply Voltage	Vcc	3.135	3.465	V
Total Power Consumption	Pc		5	W
Bit Rate	BR		212.5	Gbps
Fiber Length on OM3 MMF			70	m
Fiber Length on OM4 MMF			100	m

Transmitter Optical Interface

Parameter	Symbol	Min	Typical	Max	Unit
Data rate per lane	DR		26.5625		Gbd
Modulation format		PAM4
Center Wavelength	λ	840	850	868	nm
RMS spectral width	σ			0.65	nm
Average Launch power, each lane	Pavg	-6.5		4	dBm
Optical Power OMA, each Lane	PoMA	-4.5		3	dBm
Launch power in OMA outer minus TDECQ		-5.9			dBm
Transmitter and dispersion eye closure (TDECQ), each lane	TDECQ			4.5	dB
Extinction ratio	ER	3			dB
Optical Return Loss Tolerance	ORLT			12	dB
Optical Power for TX DISABLE				-30	dBm
Encircled fluxb¹		≥86%at 19 um ≤30%at 4.5 um

Notes:

1.Measured into type A1a.2 or type A1a.3, or A1a.4,50 um fiber, in accordance with IEC 61280-1-4

Receiver Optical Interface

Parameter		Symbol	Min	Typical	Max	Unit
Data rate per lane		BR		26.5625		Gbd
Modulation format			PAM4
Damage threshold			5			dBm
Average receive power, each lane			-8.4		4	dBm
Receiver reflectance		Rr			-12	dB
Receiver sensitivity, each lane¹			RS=max (-6.5, SECQ-7.9)			dBm
Stressed receiver sensitivity, each ane					-3.4	dBm
Rx LOS	Assert		-30			dBm
	De-assert				-9	dBm
	Hysteresis		0.5			dB

Notes:

1.Receiver sensitivity is informative and is defined for a transmitter with a value of SECQ. Measured with conformance test signal at TP3 for BER = 2.4E-4 Pre-FEC.

High speed Electrical Specifications

Parameters	Min	Typical	Max	Unit
Supply voltage	3.135		3.465	V
Supply Current			1.59	A
Input differential impedance	90	100	110	Ω
Differential pk-pk input Voltage Tolerance	900			mVpp
Differential data output swing			900	mVpp
Bit Error Rate Pre-FEC			2.4E-4
Input Logic Level High	2		Vcc	V
Input Logic Level Low	0		0.8	V
Output Logic Level High	Vcc-0.5		Vcc	V
Output Logic Level Low	0		0.4	V

PIN Definitions

QSFP56 pin-out as being defined by QSFP MSA，PIN Descriptions are as follows:

200G QSFP56 SR4

Package dimensions

shows the package dimensions of the module. Package dimensions are specified in QSFP MSA.

200G QSFP56 SR4

Ordering Information

Part Number

Temperature Range

Distance

Fiber Type

E/O

O/E

RQ56-200G-SR4

0 to 70℃

100m

MMF

VCSEL

850nm

相关产品

200G QSFP56 FR4 2KM LC PAM4 Optical Transceiver

Features 4 duplex channels transmitters and receivers Integrated CWDM LD and PD array LC/UPC connecting interface compliant Single +3.3V power supply DDM function implemented Hot-pluggable QSFP56 form factor Transmission length up to 2km Low power dissipation:

48 口 25G/10G+8口100G 网络分流器网络流量复制器汇聚分流 TAP交换机 RD-TAP-48Y8C

19英寸标准机架式，1RU高度 48口SFP28 + 8口QSFP28; 支持48个25GE/10GE/GE（SFP28）和8个100GE/40GE（QSFP28） 1个RJ45管理网口，1个RJ45串口双路冗余电源支持标准五元组、输入接口、VLAN ID、固定位置特征码过滤支持VLAN、MPLS标签识别剥离支持不低于2层VLAN、6层MPLS、IPinIP、GTP-U、GRE、VXLAN、ERSPAN隧道报文的识别支持CLI、SNMP、WEB管理、WEB管理支持HTTPS

16路双纤双向 C21-C36 DWDM 波分复用设备

工业轨式8路 RS-232/RS-422/RS-485 串口服务器

可以用于许多嵌入式网络控制应用产品：工业自动化生产安防门禁：网络门禁、报警设备、红外探测报警、远程读卡器智能家居设备：智能家居网关、智能插座、智能开关网络IO控制器：工业远程IO输入、远程继电器控制建筑智能和能源监控医疗监控设备

100Hz 48路双纤双向 C17-C64 DWDM 波分复用设备

1310nm port can support 1G LX/SX, 10G LR, 40G ER4/LR4, 100G LR/ER4/LR4/ZR4; it for Existing Legacy Traffic. Mon port is for network link monitoring or power monitoring, easy troubleshooting without affecting traffic.

2*100G QSFP28 转 200G CFP2 TMUX 板卡 FW842

产品特性: 波长可调，支持最大两路200G 75GHz * 64波，200G 100GHz*40波。具备灵活的相干调制技术:DP-16QAM,DP-8QAM,DP-QPSK。具备多种FEC纠错技术:oFEC,CFEC,SCFEC,SDFEC。支持灵活业务接入功能:100GE, 100GE KR4, OTU4和100G FlexE。支持完善的性能监控和统计功能。支持以太网RMON性能统计，DM时延及PRBS检测功能，OTN的PM和SM性能统计等功能。支持高精度板卡温度，电压，电流及功耗实时监控。客户侧支持多种模块接口类型:100GSR4/CWDM4/LR4/PSM4。支持统一网管平台，网管方式SNMP、CLI、Web、NMS(图形化界面)和NetconfYang模型接口。

8口网络分光器

低插损，不影响数据流量包。无需电源，无需IP址址，无需MAC地址，100%无源产品，性能安全可靠安装和操作简单，非专业人士即可独立完成。 8个OTAP端口，支持4路主链路串接，数据流量复制；可替代4个交换机镜象端口。成本低，集成度高，最多可集成32个OTAP端口，支持16路主链路中接，数据流量复制

3端口 CWDM 滤波器 CWDM 波分器件

Single channel 3 port CWDM filter, 1270nm~1610nm waves. Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability

联系我们